Table of Contents
Advertisement
IO card reset submenu
This operation reloads the factory default settings for all
input and output ports on all currently installed I/O
boards. The matrix will reboot after execution.
Select 'YES' to execute operation. Select 'NO' or press
escape ● to return to previous menu without any
changes.
EDID reset submenu
This operation emulates the factory default F49 EDID
(Universal HDMI with deep color) to all input ports on all
currently installed I/O boards.
Select 'YES' to execute operation. Select 'NO' or press
escape ● to return to previous menu without any
changes.
HDCP key reset submenu
This operation clears the HDCP key cache in the matrix.
This is useful when a source cannot accept as many
keys as the matrix stores.
Select 'YES' to execute operation. Select 'NO' or press
escape ● to return to previous menu without any
changes.
Protocol reset submenu
This operation sets the Lightware communication
protocol for every control interface (LAN, RS-232, USB).
Beep sounds indicate protocol change.
Select 'YES' to execute operation. Select 'NO' or press
escape ● to return to previous menu without any
changes.
All reset submenu
This operation resets all the above mentioned settings.
The matrix will reboot.
Select 'YES' to execute operation. Select 'NO' or press
escape ● to return to previous menu without any
changes.
Page 54 / 137
~IO card reset
Reset IO cards?
~NO
YES
~EDID reset
Reset EDID settings?
~NO
YES
~HDCP key reset
Reset HDCP settings?
~NO
YES
~Protocol reset
Reset Protocols?
~NO
YES
~All reset
Reset all settings?
~NO
YES
Section 5. Operation
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
Advertisement
Table of Contents
