Table of Contents
Advertisement
USB control
1
2
Menu display
2
3
Menu navigation
4
Status LEDs
5
Control Lock
Output Lock
6
Source buttons
7
Destination buttons
8
Take / Auto
9
Load Preset
10
Save Preset
EDID mode
11
Signal Present
12
Info: The unlabeled buttons are disabled, and are only for future functions.
Section 3. Controls and connections
USB connection for Lightware Matrix Controller Software.
Displays status information and menu operation.
Up, down, left, right, escape and enter buttons for menu
navigation.
CPU live LED blinks to indicate normal operation. Power LED
lights green when the router is powered on.
Disables or enables front panel operation. When red
illuminated, all operations on front panel are prohibited.
Locks and protects one (or more) outputs. Inhibits accidental
input changing on protected output.
Source buttons have three functions: to select an input, to
select a preset and to view the selected input's state (only in
TAKE mode).
Destination buttons have two functions: to select an output, or
to view the selected output's state.
Displays the actual switching mode of the router (TAKE or
AUTOTAKE). Long press toggles the switching mode, short
press executes switching in TAKE mode.
Loads a previously saved crosspoint preset from one of the
preset memories.
Stores actual crosspoint state, in one of the preset memories.
Switches the Menu display to EDID menu allowing EDID switch,
EDID save etc.
Displays live sources and attached sinks on source and
destination buttons.
MX-FR series modular matrices
User's Manual
Page 17 / 137
Advertisement
Table of Contents
