Table of Contents
Advertisement
MX-FR series modular matrices
User's Manual
Step 5. Select the desired device
Double click on the IP address, then click "YES" to establish connection with the matrix
router. It will take 10-15 seconds to get all information from the router.
Info: The bootloader application will restart the router when it establishes the connection. All
connected DVI sources and monitors will act as if the router was powered down. The
matrix beeps when it is rebooted.
Step 6. Review the firmware versions
After the connection is made, the device properties, and he installed controller modules
are displayed.
Select the one or more controllers that need firmware upgrade by clicking the checkbox
next to it.
MX-CPU2 is the main processor's firmware. MX-CP controllers are the front panel button
modules. The number of the MX-CP modules depends on the matrix frame size. These
modules must have the same firmware installed. The Web Package is the module which
handles the LAN connections and hosts the built-in website.
Step 7. Browse for the new firmware(s)
Click the corresponding cell in the "Browse New Firmware" column. A dialog pops up, to
confirm if you really want to modify the path. Now you can browse for the new firmware
file to upload. After opening the new file, the new firmware field will contain the name of
the firmware file.
Section 10. Firmware upgrade
Page 129 / 137
Advertisement
Table of Contents
