Table of Contents
Advertisement
Input port settings submenu (DVI-D type)
Covered boards: MX-DVID-IB, MX-DVI-TP-IB(+)
The input cable equalization can be set in 0.1dB
increments from 0dB to 41.0 dB, or 'Auto'. Use the left ◄
and right ► buttons to change the value.
Input port settings submenu (HDMI type)
Covered boards: MX-HDMI-IB, MX-DVI-HDCP-IB, MX-HDMI-TP-IB, MX-CPU2 Test input
Use the up ▲ and down ▼ buttons to select the setting
to be changed.
The input cable equalization can be set to 3, 9 25, 35, 40
dB, or Auto. Use the left ◄ and right ► buttons to
change the value. (exception: MX-CPU2 Test input port
does not have cable equalization!)
The HDCP capability on the input port can be enabled or
disabled
Press enter to toggle state.
The 'Color range' conversion can be set to compress,
expand or Auto. Use the left ◄ and right ► buttons to
change the value.
Input port settings submenu (DVI-I type)
Covered boards: MX-DVII-IB, MXD-UMX-IB
Use the up ▲ and down ▼ buttons to select the parameter to be changed. Use the left
◄ and right ► buttons to change the value.
The 'Interface' parameter sets the signal type which is
connected to the input port. It can be set to Auto, Analog
auto, Analog RGB, Analog YUV, or Digital.
The 'Port mode' setting affects the signal type which is
sent to the crosspoint. All incoming analog signals are
digitized on the input. DVI or HDMI signal can be sent to
the crosspoint. This parameter can be fixed 'DVI' or 'pass
HDMI'. The latter option uses HDMI signal if the incoming
signal is HDMI as well.
The 'Audio source' parameter is accessible only with
MXD-UMX-IB. It can be set to 'No Audio', 'DVII'
(embedded audio) or 'Add-on'. The latter option takes the
audio signal from the analog stereo or the S/PDIF inputs
according to the 'Add-on source' setting.
The HDCP capability on the input can be enabled or
disabled with the 'HDCP enable' setting.
The 'Analog settings' submenu affects the analog video
input parameters.
Section 5. Operation
with
the
'HDCP
MX-FR series modular matrices
checkbox.
enable'
User's Manual
Input 1 settings
~Equalization
~< 40.7 dB
Input 9 settings
~Equalization
~< Auto
HDCP enable
[*]
Input 9 settings
Equalization
Auto
~HDCP enable
[*]~
Input 9 settings
HDCP enable
[*]
~Color range
~<Compress
Input 2 settings
~Interface
~<Auto
Port mode
Input 2 settings
~Port mode
~<pass HDMI
Audio source
Input 2 settings
~Audio source
~<DVII
HDCP enable
Input 2 settings
~HDCP enable
~<Enabled
Analog settings
Input 2 settings
HDCP enable
Enabled
~Analog settings
Page 49 / 137
~
>~
~
>~
~
>~
~
>~
~
>~
~
>~
~
>~
>>
Advertisement
Table of Contents
