Table of Contents
Advertisement
Default gateway submenu
This submenu can be used the same like IP address submenu.
Subnet mask submenu
This submenu can be used the same like IP address submenu.
Save settings
Any changes made in the IP settings menu come alive
only when 'Save settings' is executed. To do this,
navigate to this item with the up ▲ and down ▼ buttons,
then press enter or right ► button.
The 'Operation is progress' message appears on the LCD. If saving the settings succeed
then 'Operation done!' message is shown for 2 seconds.
Info: If you get ,,OPERATION FAILED" message then please try again.
RS-232 settings menu
The serial port baud rate value can be set here. Use the
left ◄ and right ► buttons to change the baud rate value.
Changes take place immediately when modifying the
value. Press the escape ● button to return to main menu.
Protocol settings menu
Navigate to this menu in the main menu list and press
the
communication protocol for each interface separately.
Use the up ▲ and down ▼ buttons to select an interface,
and then select the desired protocol with the left ◄ and
right ► buttons. Changes take place immediately when
modifying the value. A beep sound indicates that the
protocol is changed.
Press the escape ● button to return to main menu.
Input settings menu
Navigate to this menu in the main menu list and press
enter or right ► button.
Select input port submenu
Use the up ▲ and down ▼ buttons to select the port that
needs adjustment and then press the enter or right ►
button.
The items in the following submenu depend on the interface board type as different I/O
boards have different capabilities.
Page 48 / 137
enter
right ►
or
the
button
to
set
the
IP SETTINGS
Default gateway
Subnet mask
~Save settings
~
~< 10001
~RS-232 settings
RS-232 settings
~Baud rate:
~<57600
~Protocol settings>>
Protocol settings
~LAN:
~<Lightware
RS-232:
Protocol settings
Lightware
~RS-232:
~<Protocol #2
~Input settings
Select input
Input 1
~Input 2
Input 3
Section 5. Operation
>>
>~
>>
~
>~
~
>~
~
>~
>>
>>
Advertisement
Table of Contents
