Table of Contents
Advertisement
Output boards
The table below shows a summary how different output boards can detect connected
displays or other sink devices.
hidden: Some output boards detect the hotplug signal from the connected display
If the mouse pointer hovers over an input our output port label, a hint message will come
up showing the port's name and its status information.
Legend for input ports
6.3.2. CPU board DVI ports
The MX-CPU2 board has a Test DVI input, and a preview DVI output port. See section
2.1.1 about functions and usage.
When used in the MX-FR80R or MX-FR65R router frame, the
th
80
input port and the 8
can be controlled by selecting the appropriate option at the right
side of the control window.
The port indication in the last column of the crosspoint array
changes to 'I80' or 'TIN' regarding this setting.
Page 68 / 137
Model
MX-DVID-OB
MX-DVI-TP-OB
MX-DVI-TP-OB+
MX-DVI-OPT-OB-...
MX-DVI-OPT-OB-R-...
MX-DVIDL-OB
MX-DVIDL-OPT-OB-...
MX-DVI-HDCP-OB
MX-HDMI-OB
MX-HDMI-TP-OB
MXD-HDMI-TP-OB
MX-HDMI-OPT-OB-...
MX-CPU2 Preview Out
device, however this is not shown in the port status because of compatibility
reasons.
No source connected;
or no information available
+5V is present from the source;
(source connected)
DVI signal is present
HDMI signal is present
Analog signal is present
input port of the crosspoint is multiplexed between the Test
th
port of the 10
Section 6. Software control – Using Lightware Matrix Controller
Signal
Receiver
Hotplug
type
sense
detect
no
no
no
no
no
no
no
no
no
no
no
no
no
no
hidden
hidden
no
hidden
no
hidden
no
laser
hidden
Legend for output ports
No sink connected;
or no information available
Monitor or other sink device is
present
th
input board. This switch
no
no
no
no
no
Advertisement
Table of Contents
