Table of Contents
Advertisement
6.7. Status menu
Device information, such as remote connection setup, installed boards' versions and
hardware health are displayed in this window.
Info: If the device is connected via RS-232, the IP address field shows "serial connection"
instead of the IP address.
If the matrix is connected via IP connection, the serial and IP settings can be viewed by
clicking on the "Serial and IP Settings..." button.
MX-FR80R and MX-FR65R
The MX-FR80R and MX-FR65R matrix frame has more hardware health information
which is shown on the Advanced tab.
Page 96 / 137
Figure 6-15. Status menu
Figure 6-16. Advanced Status menu
Section 6. Software control – Using Lightware Matrix Controller
Advertisement
Table of Contents
