Mx-Fr17 - Lightware MX-FR9 User Manual

3.5. MX-FR17

Front panel view
Control Lock
5 7
Output Lock 6
USB control
1
2
Menu display
3 Menu navigation
4 Status LEDs
5
Control Lock
6 Output Lock
Source buttons
7
8 Destination buttons
9 Take / Auto
Load Preset
10
Save Preset
EDID mode
11
Signal Present
12
Section 3. Controls and connections
Source buttons
USB control 1 Menu display
USB connection for Lightware Matrix Controller Software.
Displays status information and menu operation.
Up, down, left, right, escape and enter buttons for menu
navigation.
CPU live LED blinks to indicate normal operation. Power LED
lights green when the router is powered on.
Press long to disable or enable front panel buttons. When red
illuminated, all operations on front panel are prohibited.
Locks one (or more) outputs. Inhibits accidental input changing
on protected output.
Source buttons can be used to select an input or preset or to
view the selected input's state.
Destination buttons can be used to select an output, or view the
selected output's state.
Displays the actual switching mode (TAKE or AUTOTAKE).
Long press toggles the switching mode, short press executes
switching in TAKE mode.
Loads a previously saved crosspoint preset from one of the
preset memories.
Stores actual crosspoint state, in one of the preset memories.
Switches the Menu display to EDID menu allowing EDID switch,
EDID save etc.
Displays live sources and attached sinks on source and
destination buttons.
MX-FR series modular matrices
Destination buttons
8
Menu navigation
2
User's Manual
9 Take / Auto
Preset buttons
10
Signal Present
12
EDID mode
11
3 4 Status LEDs
Page 23 / 137