Connectors (Available On Some I/O Boards); Fiber Optical Inputs And Outputs; Sdi Inputs - Lightware MX-FR9 User Manual

3.7.6. RS-232 connectors (available on some I/O boards)
MXD-HDMI-TP interface boards provide standard 9 pin female and male D-subminiature
receptacles for serial port pass-thru to remote HDMI-TP extenders.

3.7.1. Fiber optical inputs and outputs

The optical interface boards can be ordered with several standard fiber connector types.
3.7.2. 3G-SDI inputs
Standard BNC receptacle is used for 3G-SDI inputs.
Section 3. Controls and connections
5 1
9 6
D-sub 9-pin female (DE9F)
Pin nr.
1 NC - non connected
2 RX data receive
3 TX data transmit
4 DTR
5 GND signal ground (shield)
6
DSR
7 RTS
8 CTS
9
NC - non connected
Table 3-5. D-sub connector pin assignment for standard RS-232
ST receptacle
NT receptacle (Neutrik® OpticalCON DUO)
BNC receptacle
MX-FR series modular matrices
D-sub 9-pin male (DE9M)
RS-232 pin out
(Internally connected to Pin 6)
(Internally connected to Pin 4)
(Internally connected to Pin 8)
(Internally connected to Pin 7)
LC receptacle
BNC plug
User's Manual
5 1
9 6
SC receptacle
Page 29 / 137