Table of Contents
Advertisement
Switch In## Out## menu
The numbers shown in the name of this menu depend
on the router frame. 'Switch In17 Out17' appears for MX-
FR17, and 'Switch In33 Out33' appears for MX-FR33,
MX-FR33L and MX-FR33R. For MX-FR9 and MX-FR80R
and MX-FR65R this menu is disabled.
Navigate to this menu in the main menu list and press
enter or right ► button.
This menu makes possible to switch the Test input and Preview output ports from the
front panel. These ports do not have a dedicated button with backlight like other I/O ports.
Use the up ▲ button to the select the Test input port and the down ▼ button to select the
Preview output port. The checkboxes act like the backlight for the illuminated I/O port
buttons. If the asterisk appears next to the port name, it means that it is selected.
This menu is activated for three seconds every time when an I/O button is pressed on the
front panel. Also this menu appears automatically when the AUTOTAKE mode is
activated. This gives quick access to the Test input and Preview output ports without
navigating to this menu. However if this menu is selected manually from the main menu
list, it remains active until the escape ● button is pressed.
Input #80 menu
This menu only appears in MX-FR80R and MX-FR65R
router frames.
Navigate to this menu in the main menu list and press
enter or right ► button.
It makes possible to select the crosspoint's 80
use the Test input port from the CPU board or the 8
from the 10
Info: The 80
port of the 10
selected port (Test input or Input board #10) will be available as the 80
crosspoint switch.
Page 56 / 137
th
input board.
th
input port of the crosspoint is multiplexed between the Test input port and the 8
th
input board. This switch is independent from the crosspoint state. The
~Switch In17 Out17>>
Press UP:
Test input
Press DOWN:
Preview output
~Input #80
Input #80
<Test input
th
port to
th
port
Section 5. Operation
[ ]
[*]
>>
>
th
th
input on the
Advertisement
Table of Contents
