Lightware MX-FR9 User Manual page 79

HDMI embedded pass-through:
Audio addon embedded to HDMI: Use the analog stereo or S/PDIF audio input and
Conversion mode
The analog stereo and S/PDIF audio ports can be configured as inputs and outputs as
well. (The LEDs on next to the connectors indicate if the port works as input or output to
prevent wrong connections.) If they are configured as input, its signal can be used to
embed into the HDMI signal and/or output on the other audio connector. The available
modes:
Mode
AnalogHDMI,
AnalogSPDIF
AnalogHDMI,
HDMISPDIF
HDMIAnalog,
SPDIFHDMI
S/PDIFHDMI,
S/PDIFAnalog
HDMISPDIF,
HDMIAnalog
Note that conversion between S/PDIF or HDMI and analog audio is available only with
PCM stereo audio signals.
Analog options
Analog video signals are digitized on the input. The timing parameters can be adjusted
here if needed. Timing presets can be saved for each resolution separately.
Analog audio input settings
These settings appear only if the analog audio port is configured as input. Volume,
balance, gain, phase invert and DC filter can be adjusted.
Analog audio output settings
These settings appear only if the analog audio port is configured as output. Volume,
balance, bass, treble, deemphasis and phase invert can be adjusted.
Section 6. Software control – Using Lightware Matrix Controller
Connections
The analog audio is digitized and embedded into the HDMI
'A'
stream. In addition it is sent out on the S/PDIF.
HDMI deembedded
from input port
The analog audio is digitized and embedded into the HDMI
stream. The original embedded audio from the incoming HDMI
'B'
signal is sent out on the S/PDIF.
HDMI deembedded
from input port
The original embedded audio from the incoming HDMI signal is
sent out on the analog audio. The S/PDIF input is embedded
'C'
into the HDMI stream.
HDMI deembedded
from input port
The S/PDIF input is embedded into the HDMI stream. In
'D'
addition it is sent out on the analog audio.
HDMI deembedded
from input port
The original embedded audio from the incoming HDMI signal is
'E'
sent out on the S/PDIF and analog audio as well.
HDMI deembedded
from input port
MX-FR series modular matrices
Leave the incoming signal as it is.
embed it to the HDMI signal.
S/PDIF Analog
S/PDIF Analog
S/PDIF Analog
S/PDIF Analog
S/PDIF Analog
User's Manual
HDMI embedded
to crosspoint
HDMI embedded
to crosspoint
HDMI embedded
to crosspoint
HDMI embedded
to crosspoint
HDMI embedded
to crosspoint
Page 79 / 137