Lightware MX-FR9 User Manual page 51

The 'Video mode' sets the signal type to DVI or HDMI mode which is sent towards the
matrix crosspoint. The 'Audio dependent' mode sends HDMI signal to the crosspoint if the
audio source is set to embed audio from SDI or S/PDIF.
The 'Frame compatible' mode sets the signal type
according to the output board types in the matrix frame If
there are only HDMI compatible output boards then the
signal type will be HDMI.
The incoming SDI embedded audio channels can be
rearranged and allocated to HDMI audio channels. The
channel allocation preset can be selected with the
'Aud.Preset' setting. SDI audio allocation presets are
common for all SDI input ports in the matrix.
Output settings menu
Navigate to this menu in the main menu list and press
enter  or right ► button.
Select output port submenu
Use the up ▲ and down ▼ buttons to select the port that
needs adjustment and then press the enter  or right ►
button.
The items in the following submenu depend on the
interface board type as different I/O boards have different
capabilities. Use the up ▲ and down ▼ buttons to select
the setting to be changed.
Output port settings submenu (DVI-D type)
Covered boards: MX-DVID-OB, MX-DVI-TP-OB, MX-DVI-OPT-OB-RCLK
The 'Deskewing' can be enabled or disabled with this
checkbox. Default setting is disabled. Press enter  to
toggle state.
The 'Deskew level' can be set using the left ◄ and right
► buttons. Makes effect only if the deskewing is enabled.
Default setting is 4.
The 'PLL filter' can be enabled or disabled with this
checkbox. Default setting is enabled. Press enter  to
toggle state.
The 'PLL value' can be set using the left ◄ and right ►
buttons. Makes effect only if the PLL filter is enabled.
Default setting is 4.
Section 5. Operation
MX-FR series modular matrices
User's Manual
Input 17 settings
~Video mode
~<Audio depend.
Aud.Preset
Input 17 settings
Audio depend.
~Aud.preset
~<FACT1
~Output settings
Select output
Output 1
~Output 2
Output 3
Output 1 settings
~Deskewing
Deskew level
4
Output 1 settings
Deskewing
~Deskew level
~< 4
Output 1 settings
~PLL filter
PLL value
4
Output 1 settings
PLL filter
~PLL value
~< 4
Page 51 / 137
~
>~
~
>~
>>
>>
[*] ~
[*]
~
>~
[*] ~
[*]
~
>~