10. Firmware upgrade
Using Lightware bootloader application to upgrade router's firmware
The matrix router can only be upgraded via LAN, so connect the matrix router to the local
subnet. Be sure that there is no other active connection with the router via Ethernet.
Step 1. Install the bootloader application with "Installer_LW_bootloader.exe"
Step 2. Download and save all the firmware files that you want to upgrade. If you have a
Step 3. Run the application from
Step 4. Click "FIND" Button!
If the bootloader finds one or more routers their IP addresses, type and serial number are
listed in the tree view window.
Info
Note, that you must wait until all the devices on the network completely start up, before
pressing FIND button.
Page 128 / 137
zipped archive, extract it.
Start Menu Programs Lightware LW_bootloader.
Figure 10-1. Bootloader searches for devices
Section 10. Firmware upgrade