Software Control - Using Lightware Matrix Controller; Installing The Matrix Controller Software - Lightware MX-FR9 User Manual

6. Software control – Using Lightware Matrix Controller
The matrix router unit can be controlled using Lightware Matrix Controller software from a
Windows PC or Laptop through RS-232, USB or Ethernet port.

6.1. Installing the Matrix Controller software

Step 1. Run Installer_LW_matrix_controller_v3_3_9.exe
Step 2. Select destination folder and click Install (Using the default path is highly
Step 3. If you want to create desktop icon click Yes in the next pop-up window:
Step 4. After finishing the installation the following message appears:
Step 5. To run Lightware matrix control software find the shortcut icon in Start menu 
Uninstalling
To uninstall the control software double click on: Start menu  Programs  Lightware 
LW_matrix_controller_v3_3_9  Uninstall
Section 6. Software control – Using Lightware Matrix Controller
recommended)
Programs  Lightware  LW_matrix_controller... or on your desktop, and double
click:
MX-FR series modular matrices
User's Manual
Page 63 / 137