Query Cpu Time; Restart Matrix Router; Switch Matrix Router To Standby - Lightware MX-FR9 User Manual

Hide thumbs Also See for MX-FR9:
Table of Contents

Advertisement

Command {SETTIME=<date>●<time>●
Response (<date>●<time>●
Explanation: The matrix router's processor stores the new time.
Legend:
Info: The UTC, and therefore processor time does not observe daylight saving. For example
the Central European time is UTC+1 during winter and UTC+2 during summer.
Info: The CPU time is used mainly for timestamp in the error log.
Info: The MX-CPU2 board has a CR2032 button battery which supplies power to the clock
when the matrix is not powered on.

8.7.4. Query CPU time

Description: This command allows reading the CPU time.
Command {GETTIME}
Response (<date>●<time>●
Explanation: The matrix router responds the current CPU time.
Legend:

8.7.5. Restart matrix router

Description: The matrix router can be restarted without unplugging power.
Command {RST}
Response (Booting...)CrLf
Explanation: The matrix reboots and sends a message when it is ready.
Legend: <name> is the type of the matrix.
Info: The response can be seen only if the connection to the router is still alive.

8.7.6. Switch matrix router to standby

Description: This command works only in the MX-FR80R and MX-FR65R. The frame
can be switched to standby without unplugging power. The CPU can still communicate.
Command {PWR_<state>}
Response (Powered <state>)CrLf
Explanation: The switches to standby mode.
Legend: <state> can be OFF or ON.
Info: The I/O boards do not get any power when in standby mode. The CPU will still work and
respond only for status commands.
Section 8. Programmer's reference
Format
UTC+<zone>}
UTC+<zone>)CrLf
<date>
Date in DD.MM.YYYY. format.
<time>
Time in HH:MM:SS format.
<zone> Time
zone
in HHMM format.
Format
UTC+<zone>)CrLf
See above.
Format
(<name>●Ready!)CrLf
Format
MX-FR series modular matrices
Example (MX-FR17)
→ {SETTIME= 15.10.2012. 16:52:34
UTC+0100}
← (15.10.2012. 16:52:34
UTC+0100)CrLf
related
to
UTC
(Universal
Example (MX-FR17)
→ {GETTIME}
← (15.10.2012. 16:52:34
UTC+0100)CrLf
Example (MX-FR17)
→ {RST}
← (Booting...)CrLf
(MX-FR17 Ready!)CrLf
Example (MX-FR17)
→ {PWR_OFF}
← (Powered off)CrLf
User's Manual
coordinated
time)
Page 119 / 137

Advertisement

Table of Contents
loading

Table of Contents