Table of Contents
Advertisement
Step 1. Type in the IP address of the matrix router (check on the front panel LCD if
Step 2. The TCP port can be selected manually if the checkbox is selected. If the port is
Step 3. Click the Add button. The IP address will appear in the list.
Cannot connect to device
If the IP address was added manually then the bootloader software usually cannot detect
the device type and cannot connect to it automatically. The IP addresses with
unrecognized devices appear in the list without showing the type and serial number.
Info: Use this option with caution as the manually typed IP address is not checked if it is a
Lightware device or not. If the address belongs to an unknown network device then this
may cause malfunction of the device.
Step 1. Add the IP address manually as described above.
Step 2. Right click on the desired IP address
Step 3. The software tries to connect to the
Section 10. Firmware upgrade
possible).
not set then the default port 10001 is used.
and select 'Handle as MX-CPU2'.
device handling it as the selected type.
If the connection is succesful then the
further process is the same as the
normal firmware upgrade.
MX-FR series modular matrices
User's Manual
Page 131 / 137
Advertisement
Table of Contents
