Lightware MX-FR9 User Manual page 53

Router status menu
Navigate to this menu in the main menu list and press
enter  or right ► button.
This view is shown by default after powering on the
matrix. Matrix serial number, current IP address,
TCP/IP port, and the RS-232 baud rate is shown.
Press the escape ● button to return to main menu.
Card information menu
Navigate to this menu in the main menu list and press
enter  or right ► button.
The installed I/O board types can be checked. Navigate to
a slot with up ▲ and down ▼ buttons, and then press
enter  or right ► button to see the board information for
the selected slot. Press the escape ● button to return to
main menu.
The product name and version is shown of the installed
board in the selected slot. Press the escape ● button to
return to previous menu.
Firmware versions menu
Navigate to this menu in the main menu list and press
enter  or right ► button.
The current firmware version can be checked for each
controller module. Use the up ▲ and down ▼ buttons to
scroll through modules. Press the escape ● button to
return to main menu.
Factory reset menu
This menu contains submenus which can reload factory
defaults for certain group of settings separately. After
selecting an option (submenu) with the up ▲ and down
▼ buttons, press enter  or right ► button to execute it.
Any reset operation has to be confirmed. Some
operations need to reboot the matrix. Press the escape ●
button to return to main menu without any changes.
IP reset submenu
This operation reloads the factory default IP settings.
Parameter
IP address
port number
Subnet mask 255.255.0.0
Gateway
Select 'YES' and press enter  or right ► button to execute operation. Select 'NO' or
press escape ● to return to previous menu without any changes.
Section 5. Operation
Default value
192.168.254.254
10001
0.0.0.0
MX-FR series modular matrices
User's Manual
~Router status
Name: 11410200
IP: 192.168.002.105
Port: 10001
RS-232: 57600,8,N,1
~Card information >>
Card information
~Motherboard
Input slot #1
Input slot #2
Input slot #1
MX-DVID-IB
SCH: 2.0
PCB: 2.0
~Firmware versions>>
Firmware versions
CPU: 3.2.1
Web server: 3.0.3
Web content: 1.3.5
~Factory reset
~IP reset
IO card reset
EDID reset
HDCP key reset
~IP reset
Reset IP settings?
~NO
YES
Page 53 / 137
>>
>>
>>
>>
>>
>>