Normal Mode - Lightware MX-FR9 User Manual

Navigation
The front panel LCD has 4 lines and 20 characters in each line. The up ▲ and down ▼
buttons can be used to scroll between menu items. The enter  button steps in the
submenus or makes changes available. The escape ● button steps back to the previous
menu. The left ◄ and right ► navigation buttons modify the value for the current menu
item. The right ► button steps in the current submenu and the left ◄ button steps back
to the previous menu as well.
Menu items can be submenus, values or checkboxes. The '~' sign shows the currently
selected menu item. Submenus are marked with '>>' sign. Changeable values appear
between '<' and '>' signs. Checkboxes are shown like '[*]', where the asterisk indicates
if the function is active or not.

5.4.2. Normal mode

Main menu list
Up ▲ and down ▼ buttons select between menu items.
More items become visible when scrolling down. Enter 
or right ► buttons step in submenus.
IP settings menu
This menu contains the IP status submenu, DHCP
enable checkbox and TCP/IP port value. If the DHCP is
switched off then IP address, Default gateway and Subnet
mask can be set as well. Changes take place only when
'Save settings' is executed. Press the escape ● button to
return to main menu without saving any changes.
IP status submenu
Navigate to this submenu and press enter  or right ►
button to see the current IP address, port, gateway and
subnet mask. No changes can be made here. Press
escape ● to return to previous menu.
DHCP enable checkbox
Navigate to this item with the up ▲ and down ▼ buttons.
Pressing enter  toggles DHCP state. If DHCP is
inactive then the IP address, Gateway, and Subnet mask
cab be set manually to fix values.
Port value
Navigate to this item with the up ▲ and down ▼ buttons.
Use the left ◄ and right ► buttons to change the TCP/IP
port value.
IP address submenu
Navigate to this item with the up ▲ and down ▼ buttons.
This submenu appears only if DHCP is disabled. Press
enter  or right ► button to step in.
The four part of the fix IP address can be set separately.
Use the left ◄ and right ► buttons to select the part, and
then use the up ▲ and down ▼ buttons to change the
value of that part. Press escape ● button to return to
previous menu.
Section 5. Operation
MX-FR series modular matrices
User's Manual
~IP settings
RS-232 settings
Protocol settings
Input settings
~IP settings
IP SETTINGS
~IP status
DHCP enable
Port:
IP: 192.168.002.105
Port: 10001
GW: 000.000.000.000
SM: 255.255.255.000
IP SETTINGS
IP status
~DHCP enable
Port:
IP SETTINGS
DHCP enable
~Port:
~< 10001
IP SETTINGS
Port:
10001
~IP address
IP SETTINGS
IP address
~192.168.002.102
---
Page 47 / 137
>>
>>
>>
[*]
[*] ~
[ ]
~
>~
>>
~