4.2.1 Setting date/time
The setting is made to record the date and time of occurrence of an error.
See <Maintenance Mode> → <13. Error Log> for the contents to be recorded.
Caution on handling
• This mode is backed up with a battery. However, if the power is kept off for 7 days or longer, the
clock is made to stop. Resetting is required in this case.
Setting range
• Month
: 01 to 12
• Date
: 01 to 31
• Hour
: 00 to 23
• Minute
: 00 to 59
(1) Move the cursor to <Current Date/Time> using the
key, and press the
The cursor moves to the value to be entered.
(2) Select current date and time using the
keys.
(3) Press the
Then the item selection screen appears again.
The setting has now been completed.
key.
key to register the setting.
and the
- 38 -
ENT
ESC
,
ENT
,
,
Setting complete
INZ-TN2ZSVS-E