Buell XB 2010 Service Manual page 698

Table of Contents

Advertisement

FASTENER
Mirror fasteners, Firebolt
Mirror mount onto bracket
Muffler mount fastener, front
Muffler mounting block fastener, rear
Muffler strap fastener, front
Muffler strap fastener, rear
Negative battery cable at battery terminal
Negative battery cable at battery terminal
Neutral indicator switch
Neutral indicator switch (Firebolt)
Neutral indicator switch (Lightning and
Ulysses)
Oil cooler air scoop fasteners
Oil cooler mounting screws
Oil drain plug
Oil filter adapter
Oil line clamp at starter motor
Oil line fittings at swingarm
Oil line fittings on swingarm
Oil line p-clamp at swingarm
Oil line p-clamp fastener
Oil line p-clamp fastener
Oil line p-clamps at swingarm
Oil pressure signal light switch
Oil pump body and cover fasteners
Oil pump body and cover fasteners
Oil pump body and cover fasteners
Outer engine shroud air scoop fastener
Outer ram air scoop fastener
Oxygen sensor
XVIII TORQUE VALUES
2010 Buell XB Models Service Manual
TORQUE VALUE
72-96 in-lbs
20-22 ft-lbs
-19-21 ft-lbs
32-36 ft-lbs
108-120 in-lbs
36-48 in-lbs
60-70 in-lbs
60-70 in-lbs
120-180 in-lbs
60-84 in-lbs
100-120 in-lbs
48-72 in-lbs
96-108 in-lbs
26-29 ft-lbs
96-144 in-lbs
40-50 in-lbs
108-156 in-lbs
108-156 in-lbs
48-72 in-lbs
40-50 in-lbs
40-50 in-lbs
48-72 in-lbs
96-120 in-lbs
100-120 in-lbs
108-156 in-lbs
96-120 in-lbs
21.6-26.4 in-lbs
22-26 in-lbs
40-45 ft-lbs
8-10.8 Nm
2.47 FRONT FAIRING, WINDSHIELD, AND MIR-
RORS: FIREBOLT, Installation
27.1-29.8 Nm
2.33 MIRRORS, Installation
25.8-28.5 Nm
4.19 EXHAUST SYSTEM, Assembly and Installa-
tion
43.4-48.8 Nm
4.19 EXHAUST SYSTEM, Assembly and Installa-
tion/LOCTITE 27 (red)
12.2-13.6 Nm
4.19 EXHAUST SYSTEM, Assembly and Installa-
tion
4.1-5.4 Nm
4.19 EXHAUST SYSTEM, Assembly and Installa-
tion/You need to alternately tighten the fasteners
to torque a total of two times to make sure the
straps are evenly tightened.
6.8-7.9 Nm
2.13 REAR BRAKE LINE, Installation: Firebolt
6.8-7.9 Nm
2.13 REAR BRAKE LINE, Installation: Ulysses
13.6-20.3 Nm
6.21 NEUTRAL INDICATOR SWITCH, Removal
and Installation/LOCTITE THREADLOCKER 243
(blue)
6.8-9.5 Nm
5.15 TRANSMISSION INSTALLATION, Installing
Right Crankcase/LOCTITE 242 (blue)
11.3-13.6 Nm
5.15 TRANSMISSION INSTALLATION, Installing
Right Crankcase/LOCTITE 242 (blue)
5.4-8 Nm
2.49 AIR SCOOPS, Oil Cooler Air Scoop
10.8-12.2 Nm
3.13 OIL COOLER, Installation/LOCTITE 271
35.3-39.3 Nm
2.19 SWINGARM AND BRACE, Assembly
10.8-16 Nm
3.18 CRANKCASE, Oil Filter Adapter
5-5.5 Nm
3.6 ENGINE INSTALLATION, Assembly
12.2-17.6 Nm
3.12 OIL LINE FITTINGS, Installation
12.2-17.6 Nm
2.19 SWINGARM AND BRACE, Assembly
5.4-8 Nm
4.19 EXHAUST SYSTEM, Assembly and Installa-
tion
4.5-5.6 Nm
3.6 ENGINE INSTALLATION, Assembly
4.5-5.6 Nm
3.6 ENGINE INSTALLATION, Assembly
5.4-8 Nm
2.19 SWINGARM AND BRACE, Installation:
Swingarm
10.8-13.6 Nm
3.14 OIL PRESSURE INDICATOR SWITCH, Oil
Pressure/LOCTITE 565 HIGH PERFORMANCE
PIPE SEALANT WITH TEFLON
11.3-13.6 Nm
3.10 OIL PUMP, Assembly/Installation
12.2-17.6 Nm
3.10 OIL PUMP, Assembly/Installation
10.8-13.6 Nm
3.10 OIL PUMP, Assembly/Installation
2.4-3 Nm
4.7 OXYGEN SENSORS (O2), Installation
2.4-3 Nm
2.49 AIR SCOOPS, Ram Air Scoop and Fan
Shroud: Ulysses
54.2-61 Nm
4.7 OXYGEN SENSORS (O2), Installation/ANTI-
SEIZE
NOTES

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents