Buell XB 2010 Service Manual page 98

HOME
Table 2-16. Recommended Suspension Settings: 2010 Ulysses XB12XT
LOAD***
LB KG
320-GVWR 145-GVWR
Settings are for XB12XT vehicles with empty sidecases and topcase installed.If operating without sidecase and topcase
attached, refer to settings in ONE LOWER weight category.
*Both Front and Rear Spring Preload is set by loosening adjuster counterclockwise until it stops at minimum and then counting
the number of turns in to get to the desired setting. The rear preload knob clicks every 1/2 turn.
**All damping adjuster settings are done by tightening adjuster clockwise until it stops at maximum setting and then counting
the turns counterclockwise to get to the desired setting.
***Load includes rider, passenger, cargo, accessories and riding gear. If more than 50% of the load is cargo and passenger,
reduce front preload 3-4 turns from the chart.
2-18 2010 XB Service: Chassis
FRONT FORKS
*PRELOAD: **COMPRES-
TURNS IN SION: TURNS
FROM MIN- OUT FROM
IMUM MAXIMUM
14 1-7/8
**REBOUND: *PRELOAD:
TURNS OUT TURNS IN
FROM MAX- FROM MIN-
IMUM IMUM**
1-1/2 max
REAR SHOCK
**COMPRES- **REBOUND:
SION: TURNS TURNS OUT
OUT FROM FROM MAX-
MAXIMUM IMUM
1 1/2