Front Fairing, Windshield, And Mirrors: Firebolt - Buell XB 2010 Service Manual

HOME
FRONT FAIRING, WINDSHIELD, AND MIRRORS:
FIREBOLT
REMOVAL
1. See Figure 2-205. Remove two center (4) and four side
windscreen fasteners (3) to remove windshield (1).
2. Remove mirrors (2).
3. Remove turn signals (6). See
NALS and remove front fairing (5).
sm00682
6
1. Windshield
2. Mirrors
3. Side windshield fastener
4. Center windshield fastener
6.14 FRONT TURN SIG-
7
Figure 2-205. Front Fairing and Windscreen: Firebolt
INSTALLATION
1. See Figure 2-205. Position fairing (5) onto fairing support
bracket and install turn signals (6, 7). See
TURN SIGNALS.
2. Install mirrors (2) with fasteners and tighten to 72-96 in-
lbs (8-10.8 Nm).
3. Install two center (4) and four side windscreen fasteners
(3) and tighten to 10-12 in-lbs (1-1.4 Nm).
1
5. Front fairing
6. Turn signal
7. Turn signal fastener
8. Well nut
2010 XB Service: Chassis 2-161
2.47
6.14 FRONT
2
3
4
5