Buell XB 2010 Service Manual page 264

HOME
sary to lift the lid gasket above the middle of latch and out of
the way.
2. See Figure 2-232. Remove and discard two Phillips head
screws from existing latch mechanism.
3. Slide latch mechanism out of case.
sm05222
1
1. Lock
2. Large hex nut
3. Latch mechanism
Figure 2-234. Latch Mechanism and Lock
2-184 2010 XB Service: Chassis
4. See
from latch mechanism.
Installation
1. See
and secure with large hex nut.
2. Slide latch mechanism into luggage case.
3. See
head screws into latch mechanism and tighten.
See Figure
2
lid gasket (1) back into place.
3
Figure 2-234. Loosen large hex nut and remove lock
Figure 2-234. Install lock into new latch mechanism
Figure 2-232 or Figure 2-233. Install two new Phillips
NOTE
2-233. On the top case it will be necessary to press