Buell XB 2010 Service Manual page 451

HOME
9. Expand and install new retaining ring (14).
10. Install dog ring (15). Make sure to install with dog ring
facing same direction as when it was removed.
11. Install spacer (16).
sm00321
1 2 3
1. Countershaft 5th gear (integral to shaft)
2. Countershaft
3. Split bearing
4. Countershaft 1st gear
5. Thrust washer
6. Retaining ring
7. Dog ring
8. Countershaft 4th gear
9. Retaining ring
10. Thrust washer
12. Install new split bearing (17) in 2nd gear position on shaft.
13. Install 2nd gear (18) and spacer (19).
At this point both mainshaft and countershaft sub-assemblies
are ready to be pressed into the left crankcase half.
5 6
9
7 8
4
Figure 5-64. Transmission Countershaft
NOTE
10 13 14
11 12 15 16
11. Split bearing
12. Countershaft 3rd gear
13. Thrust washer
14. Retaining ring
15. Dog ring
16. Spacer
17. Split bearing
18. Countershaft 2nd gear
19. Spacer
2010 XB Service: Drive/Transmission 5-39
17 18 19