Buell XB 2010 Service Manual page 288

HOME
sm03744
3
1
1. Neutral switch connection [131]
2. Oil pressure indicator switch wire
3. Interactive exhaust cable
Figure 3-10. Electrical Connectors and Interactive Exhaust
Cable Under Sprocket Cover
33. Remove front and rear muffler brackets.
34. See Figure 3-11. Remove two fasteners (2) and remove
sidestand assembly.
NOTE
On Ulysses models it will be necessary to remove three
fasteners in order to remove the sidestand assembly.
35. Support engine with wide scissors jack.
3-20 2010 XB Service: Engine
sm03933
2
1. Sidestand assembly
2. Bracket fasteners (2)
Figure 3-11. Sidestand Assembly (Extended)
See Figure
frame with overhead hoist in order to remove rear isolator bolt.
Failure to do this will result in main frame dropping slightly.
1
NOTE
3-12. At this point it is necessary to support main
2