Buell XB 2010 Service Manual page 84

HOME
FASTENER
Clutch hand lever fastener, Firebolt
Clutch hand lever fasteners
Clutch inspection cover fasteners
Damper rod jamnut
Deflector fasteners
Deflector jam nuts
Deflector pivot shaft risers
Drive sprocket fasteners
Electronic control module fasteners
Engine shift lever pinch screw
Engine shroud air scoop fasteners
Fairing support bracket fasteners, Fire-
bolt
Fasteners for tail sections to main
frame/fuel tank assembly, Ulysses
Fender fasteners
Flasher fastener
Footpeg mount
Footpeg mount, Firebolt and Lightning
Footpeg mount, Firebolt and Lightning
Footpeg mount fasteners, rider
Footpeg mount fasteners, rider, Firebolt
and Lightning
Footpeg support bracket
Footpeg support bracket
Fork cap
Fork clamp, lower
Fork clamp, lower
Fork clamp, upper
Fork clamp, upper
Fork clamp, upper
Front ECM fastener
Front fender fasteners
2-4 2010 XB Service: Chassis
TORQUE VALUE
60-84 in-lbs 6.8-9.5 Nm
60-84 in-lbs 6.8-9.5 Nm
84-108 in-lbs 9.5-12 Nm
22-30 ft-lbs 29.8-40.7 Nm
24-36 in-lbs 2.7-4 Nm
39-48 in-lbs 4.4-5.4 Nm
43-49 in-lbs 4.8-5.5 Nm
35-37 ft-lbs 48-50 Nm
72-96 in-lbs 8-10.8 Nm
48-60 in-lbs 5.4-6.8 Nm
12-36 in-lbs 1.4-4 Nm
16-18 ft-lbs 22-26 Nm
21-23 ft-lbs 28.5-31.2 Nm
12-36 in-lbs 1.4-4 Nm
36-60 in-lbs 4-6.8 Nm
132-144 in-lbs 15-16 Nm
25-28 ft-lbs 33.9-38 Nm
25-28 ft-lbs 33.9-38 Nm
132-144 in-lbs 14.9-16.2 Nm
132-144 in-lbs 14.9-16.2 Nm
132-144 in-lbs 14.9-16.3 Nm
132-144 in-lbs 14.9-16.3 Nm
22-30 ft-lbs 29.8-40.7 Nm
20-22 ft-lbs 27.1-29.8 Nm
20-22 ft-lbs 27.1-29.8 Nm
23-25 ft-lbs 31.2-33.9 Nm
23-25 ft-lbs 31.2-33.9 Nm
23-25 ft-lbs 31.2-33.9 Nm
30-40 in-lbs 3.4-4.5 Nm
36-48 in-lbs 4-5.4 Nm
NOTES
2.31 HANDLEBARS: FIREBOLT, Installation
2.32 HANDLEBARS: LIGHTNING AND ULYSSES
MODELS, Installation
2.25 CLUTCH CONTROL, Assembly and Installa-
tion/Tighten in a crosswise pattern
2.16 FRONT FORKS, Assembly
2.28 DEFLECTORS, Assembly and Installation
2.28 DEFLECTORS, Assembly and Installation
2.28 DEFLECTORS, Assembly and Installation
2.6 REAR WHEEL, Repair
2.26 HEADLAMP ASSEMBLY AND SUPPORT
BRACKET, Installation: Firebolt
2.25 CLUTCH CONTROL, Assembly and Installa-
tion
2.49 AIR SCOOPS, Engine Shroud Air Scoop
2.27 FAIRING SUPPORT BRACKET: FIRE-
BOLT, Installation
2.43 LEFT AND RIGHT TAIL SECTION: ULYSSES
MODELS, Assembly/LOCTITE 271 (red)
2.15 FENDERS, Rear Fender:
XB12Ss/XB12XT/XB12X
2.26 HEADLAMP ASSEMBLY AND SUPPORT
BRACKET, Assembly: Firebolt
2.35 HEEL GUARD AND FOOTPEG MOUNTS:
ULYSSES MODELS, Mount Installation
2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT AND LIGHTNING MODELS, Pas-
senger/LOCTITE 271 (red)
2.39 SUBFRAME TAIL ASSEMBLY AND BODY
WORK: FIREBOLT, Assembly/LOCTITE 271 (red)
2.37 BELT GUARDS, Installation
2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT AND LIGHTNING MODELS, Rider
2.54 LUGGAGE: XB12XT, Installation: Side Case
2.55 LUGGAGE: XB12XP, Side Case
2.16 FRONT FORKS, Assembly
2.17 FORK CLAMPS, Installation: Firebolt/LOC-
TITE 271 (red)
2.17 FORK CLAMPS, Installation: Light-
ning/Ulysses/LOCTITE 271 (red)
2.17 FORK CLAMPS, Installation: Firebolt/LOC-
TITE 271 (red)
2.17 FORK CLAMPS, Installation: Light-
ning/Ulysses/LOCTITE 271 (red)
2.18 STEERING HEAD BEARINGS, Installa-
tion/LOCTITE 271 (red)
2.43 LEFT AND RIGHT TAIL SECTION: ULYSSES
MODELS, Assembly
2.15 FENDERS, Front Fender:
XB12R/XB9SX/XB12SX/XB12Scg/XB12XT/LOC-
TITE 271 (red)