Sprocket Cover - Buell XB 2010 Service Manual

HOME

SPROCKET COVER

REMOVAL
1. See Figure 2-184. Remove rear right chin fairing fasteners.
2. See Figure 2-185. Remove sprocket cover fasteners and
washers (1, 3).
INSTALLATION
NOTE
Apply LOCTITE 222 (purple) to long fastener (1) only.
1. See Figure 2-185. Install sprocket cover (2) using sprocket
cover fasteners (1, 3) and tighten all fasteners and
washers (1) to 12-36 in-lbs (1.4-4 Nm).
2. Install chin fairing. See 2.50 CHIN
sm00122
Figure 2-184. Chin Fairing Assembly, Right Rear Fasteners
sm00123
FAIRING.
1
3
1. Long fastener and washer
2. Sprocket cover
3. Short fastener and washer (2)
Figure 2-185. Sprocket Cover
2010 XB Service: Chassis 2-137
2.36
2