Buell XB 2010 Service Manual page 8

Always wear proper eye protection when using hammers,
arbor or hydraulic presses, gear pullers, spring com-
pressors, slide hammers and similar tools. Flying parts
could result in death or serious injury. (00496b)
Some of these service operations require the use of tools
specially designed for the purpose. These special tools should
be used when and as recommended. It is important to note
that some warnings against the use of specific service methods,
which could damage the motorcycle or render it unsafe, are
stated in this manual. However, please remember that these
warnings are not all-inclusive. Inadequate safety precautions
could result in death or serious injury.
Since Buell Motorcycle Company could not possibly know,
evaluate or advise the service trade of all possible ways in
which service might be performed, or of the possible hazardous
consequences of each method, we have not undertaken any
such broad evaluation. Accordingly, anyone who uses a service
procedure or tool which is not recommended by Buell Motor-
cycle Company must first thoroughly satisfy himself that neither
his nor the operator's safety will be jeopardized as a result.
Failure to do so could result in death or serious injury.
PRODUCT REFERENCES
Read and follow warnings and directions on all products.
Failure to follow warnings and directions can result in
death or serious injury. (00470b)
When reference is made in this manual to a specific brand
name product, tool or instrument, an equivalent product, tool
or instrument may be substituted.
Kent-Moore Products
All tools mentioned in this manual with an "HD", "J" or "B"
preface must be ordered through SPX Kent-Moore. For ordering
II FOREWORD
information or product returns, warranty or otherwise, visit
www.spx.com.
Loctite Sealing and Threadlocking Products
Some procedures in this manual call for the use of Loctite
products. If you have any questions regarding Loctite product
usage or retailer/wholesaler locations, please contact Loctite
Corp. at www.loctite.com.
PRODUCT REGISTERED MARKS
Alcantara S.p.A., Allen, Amp Multilock, Bluetooth, Brembo,
Delphi, Deutsch, Dunlop, Dynojet, Fluke, G.E. Versilube, Gunk,
Hydroseal, Hylomar, Kevlar, Lexan, Loctite, Lubriplate, Keps,
K&N, Magnaflux, Marson Thread-Setter Tool Kit, MAXI fuse,
Molex, Michelin, MPZ, Mulitilock, NGK, Novus, Packard, Pirelli,
Permatex, Philips, PJ1, Pozidriv, Robinair, S100, Sems, Snap-
on, Teflon, Threadlocker, Torca, Torco, TORX, Tufoil, Tyco,
Ultratorch, Velcro, X-Acto, and XM Satellite Radio are among
the trademarks of their respective owners.
H-D MICHIGAN, INC. TRADEMARK
INFORMATION
1125CR, 1125R, Blast, Buell, Firebolt, Glaze, Gloss, Harley,
Harley-Davidson, HD, H-D, Lightning, Sunwash, Tender, Triple
Tail, Thunderstorm, Ulysses, Uniplanar, ZTL and ZTL-2 are
among the trademarks of H-D Michigan, Inc.
CONTENTS
All photographs, illustrations and procedures in this manual
may not necessarily depict the most current model or com-
ponent, but are based on the latest production information
available at the time of publication.
Since product improvement is our continual goal, Buell Motor-
cycle Company reserves the right to change specifications,
equipment or designs at any time without notice and without
incurring obligation.