Buell XB 2010 Service Manual page 507

HOME
sm04632
1. Handlebar wire harness retainer
2. Cable strap for heated hand grip wire
Figure 6-33. Location of Second Cable Strap, Right Side
4. See Figure 6-34. Secure the left heated hand grip wire to
the hand control wire bundle.
5. Install the next cable strap on the left side just below the
second handle bar wire harness retainer.
sm04633
Figure 6-34. Location of Cable Straps, Left Side
6. See Figure 6-35. On the right side, install a cable strap
securing the heated grip lead and hand control wires
together under the right hand side of the instrument cluster.
1
2
sm04640
Figure 6-35. Location of Cable Strap Securing the Right
Side Hand Grip Wire Below the Instrument Cluster
7. See Figure 6-36. On the left side, install a cable strap
securing the hand grip wire to the instrument module
connector under the left hand side of the instrument
cluster.
8. Connect the two black 3-way connectors for the heated
grip leads.
sm04637
1
1. Black 3-way connector for heated hand grips (2)
2. Cable strap securing the left hand grip wire to
the instrument module connector
Figure 6-36. Heated Hand Grip Connections and Cable
Strap
9. See Figure 6-37.To verify the wire bundles and connectors
are not just hanging. Apply one more wire tie beneath the
upper dash casting and around the bundle of wires and
connectors to secure them up against the upper casting.
2010 XB Service: Electrical 6-33
2
1