Fuel And Oil; Fuel; Gasoline Blends: Buell Models; Engine Lubrication - Buell XB 2010 Service Manual

HOME

FUEL AND OIL

FUEL

Always use a good quality unleaded gasoline. Octane ratings
are usually found on the pump. Refer to
Avoid spills. Slowly remove filler cap. Do not fill above
bottom of filler neck insert, leaving air space for fuel
expansion. Secure filler cap after refueling. Gasoline is
extremely flammable and highly explosive, which could
result in death or serious injury. (00028a)
Use care when refueling. Pressurized air in fuel tank can
force gasoline to escape through filler tube. Gasoline is
extremely flammable and highly explosive, which could
result in death or serious injury. (00029a)
Modern service station pumps dispense a high flow of gasoline
into a motorcycle fuel tank making air entrapment and pressur-
ization a possibility.
Table 1-1. Octane Ratings
SPECIFICATION
Pump Octane (R+M)/2

GASOLINE BLENDS: BUELL MODELS

Your motorcycle was designed to get the best performance
and efficiency using unleaded gasoline. Most gasoline is
blended with alcohol and/or ether to create oxygenated blends.
The type and amount of alcohol or ether added to the fuel is
important.
Do not use gasoline that contains methanol. Doing so can
result in fuel system component failure, engine damage
and/or equipment malfunction. (00148a)
Gasoline containing METHYL TERTIARY BUTYL ETHER
(MTBE): Gasoline/MTBE blends are a mixture of gasoline
H-D TYPE
H-D Multi-grade
Screamin' Eagle SYN3
Synthetic Motorcycle
Lubricant
H-D Multi-grade
H-D Regular Heavy
H-D Extra Heavy
Table 1-1.
RATING
91 (95 RON)
Table 1-2. Recommended Engine Oils
VISCOSITY H-D RATING
SAE 10W40 HD 360
SAE 20W50 HD 360
SAE 20W50 HD 360
SAE 50 HD 360
SAE 60 HD 360
and as much as 15% MTBE. Gasoline/MTBE blends can
be used in your motorcycle.
ETHANOL is a mixture of 10% ethanol (Grain alcohol) and
90% unleaded gasoline. Gasoline/ethanol blends can be
used in your motorcycle if the ethanol content does not
exceed 10%.
REFORMULATED OR OXYGENATED GASOLINES
(RFG): Reformulated gasoline is a term used to describe
gasoline blends that are specifically designed to burn
cleaner than other types of gasoline, leaving fewer tailpipe
emissions. They are also formulated to evaporate less
when you are filling your tank. Reformulated gasolines
use additives to oxygenate the gas. Your motorcycle will
run normally using this type of gas and Harley-Davidson
recommends you use it when possible, as an aid to cleaner
air in our environment.
Some gasoline blends might adversely affect the starting,
driveability or fuel efficiency of the motorcycle. If any of these
problems are experienced, try a different brand of gasoline or
gasoline with a higher octane blend.

ENGINE LUBRICATION

Do not switch lubricant brands indiscriminately because
some lubricants interact chemically when mixed. Use of
inferior lubricants can damage the engine. (00184a)
Engine oil is a major factor in the performance and service life
of the engine. Always use the proper grade of oil for the lowest
temperature expected before the next scheduled oil change.
Refer to Table 1-2. Your authorized dealer has the proper oil
to suit your requirements.
If it is necessary to add oil and Harley-Davidson oil is not
available, use an oil certified for diesel engines. Acceptable
diesel engine oil designations include: CF-4, CG-4, CH-4 and
CI-4.
The preferred viscosities for the diesel engine oils in des-
cending order are: 20W50, 15W40 and 10W40.
At the first opportunity, see an authorized dealer to change
back to 100 percent Harley-Davidson oil.
LOWEST AMBIENT
TEMPERATURE
Below 40 °F (4 °C)
Above 40 °F (4 °C)
Above 40 °F (4 °C)
Above 60 °F (16 °C)
Above 80 °F (27 °C)
2010 XB Service: Maintenance 1-7
1.3
COLD WEATHER
STARTS BELOW 50 °F
(10 °C)
Excellent
Excellent
Good
Poor
Poor