Selecting User Program - Simplex 4007ES Programmer's Manual

Custom Control, Continued
Selecting User
Note: You cannot write custom control on InfoAlarm switches and LEDs.
Program
The first step in defining a new custom control equation is to add the equation to a User
Programs.
To add a new custom control equation:
1. Right click on one of the user programs, located at the bottom of the program list, and select
Add Equation from the list of options.
2. The Custom Control Program Properties dialog (Figure 9-9) appears. Enter a name for the
equation in the Label field and click on OK.
The Equations section of the Custom Control window updates to include the [INPUTS],
[END INPUTS] etc, entries.
4007ES Panel Programmer Manual (579-1167)
Figure 9-8. Add Equation
Figure 9-9. Equation Properties
9-6