Discharge Led Programming (Red Led - Simplex 4007ES Programmer's Manual

Releasing Specific Controls and Indications, Continued
Pre-Discharge
3. Write an equation to turn off the LED when the zone releases.
LED
Programming
(Red LED)
4. Write (or add to an existing equation) the equation to turn off the digital pseudo during
system startup or upon system reset.
5. Choose an available RED LED on the LED Module (under the Hardware tab in the
programmer) and set its mode as "ON" and set the reference address to the list that was
assigned.
4007ES Panel Programmer Manual (579-1167)
A-8