Simplex 4007ES Programmer's Manual page 125

USB File Transfer, Continued
USB File Transfer
8. Disconnect the USB storage device from the PC and insert it into the USB port located on
the CPU board that is mounted on the inner door panel of the 4007ES. Files that need to be
updated are flagged for an upgrade on the panel display (Figure 10-2).
9. Press the Process Upgrade button on the touchscreen and confirm the selections.
10. When prompted, press the
be able to go back to the original files, if necessary.
11. After the panel reboot, press on the System Upgrade button to verify that no software is
marked for an upgrade and disconnect the USB storage device by pressing the Eject USB
button located under the Mass Storage.
The panel has now been upgraded with a new job and the latest software.
Files Transferred
The following is an example of the files that can be transferred using a USB storage device:
4007_3.02.03.bin
bootloader_1.01_cpu801-4007es.bin
filesystem_1.01.01_cpu801-4007es.bin
IDNACPS_1.01.bin
IDNet2_1.01.03.bin
kernel_1.01_cpu801-4007es.bin
MsgLib_UTF8_3.01.bin
MsgLibF_UTF8_3.01.bin
NACPS_1.01.01.bin
panelui_1.01.02_cpu801.bin
userfilesystem_4007es.bin
zonerelay_1.01.01.bin
Figure 10-2. System Upgrade Window
button to take a snapshot of the existing panel software to
File
Master Controller file
File to update/boot Linux and file system
Root file system for the 4007ES FACP
Addressable panel power supply file
IDNet file
Linux kernel with modifications for the 4007ES FACP
English display message library file
French display message library file
Hybrid panel power supply file
Panel user interface file
System file (Manufacturing use only)
Zone/Relay card file
10-3
4007ES Panel Programmer Manual (579-1167)
Description