Editing The Color User Interface - Simplex 4007ES Programmer's Manual

Editing Standard Component Properties, Continued
Editing the Color The Color User Interface window has five main tabs to edit. The Card Properties tab,
User Interface
Annunciator Settings tab, the Point Editing tab, the Display Options tab, and the Access Level
tab.
To edit the Card Properties tab:
1. Enter the card's custom label. This label should make the card easily identifiable.
2. If required, select a unit, a box, and a bay number.
The following fields in the tab are filled by the programmer and cannot be edited:
To edit the Annunciator Settings tab
The annunciator settings for a remote color touchscreen LCD annunciator determine the
operation of the keyswitch. By default, the operations are disabled, except:
• Fire Alarm Display/scrolling
• Supervisory display/scrolling
• Disable display scrolling
To set the properties:
1. Click on the Hardware tab.
2. Expand the unit, the box, and the bay combination in which the annunciator resides.
3. Double click on the annunciator's icon.
4. Click on the Annunciator Setting tab (see Figure 6-3).
5. This sheet has a series of rows on the left, identifying the functions that can be performed
from the annunciator. Each row has two checkboxes: Keyswitch Required and Override on
Alarm. Check or uncheck these boxes, using the following guideline.
• Keyswitch Required. A checkmark in the Keyswitch Required box to the right of a
• Override on Alarm. A checkmark in the Override on Alarm box to the right of a function's
• Card address
• Card description
• Card default label
• Annunciator address
• Location
Figure 6-3. Color User Interface - Annunciator Settings Tab
function's row indicates the function is ignored unless a key is inserted in the annunciator's
key switch and the position of the key is on.
row indicates that if the Key Switch Required box is checked, the key switch is not
required during an alarm situation.
4007ES Panel Programmer Manual (579-1167)
6-3