Simplex 4007ES Programmer's Manual page 53

Editing Standard Component Properties, Continued
Editing the Event
The Local Points tab allows you to edit the local points associated with each of the 4007ES
DACT Card Panel point types.
To edit the Local Points tab (Figure 6-21):
1. Select the Enable Edit checkbox at the top right of the window.
2. A warning window appears. Click on Yes.
Note: Do not edit local points without prior authorization and direction from the central station.
3. Define the appropriate local points for both the Event and the Restoral columns.
4. Click Apply > OK to confirm the edits.
To edit the Points tab (Figure 6-23):
1. To edit a point, click on the point or use the up and down arrow with the <spacebar> to
toggle point selection.
2. Depending on the point, edit the fields as necessary. The non-editable fields remain grayed
out.
48-LED Module The 48-LED Module has two main tabs to configure. The Card Properties tab and the Point
Editing tab.
To edit the Card Properties tab:
1. Enter a card address for the 48-LED Module.
2. Enter the card's custom label. This label should make the card easily identifiable.
The following fields in the tab are filled by the programmer and cannot be edited:
• Card description
• Card default label
• Annunciator address
• Unit number
• Box number
• Bay number
• Location
6-17
4007ES Panel Programmer Manual (579-1167)