Simplex 4007ES Manual

UL, ULC, CSFM Listed;
FM, NYC Fire Dept Approved*
Features
Satisfies a variety of new and retrofit applications
4.3" (109 mm) diagonal color touchscreen display:
 Provides detailed system status and point information
 Supports dual language selection, including unicode
character languages
 A custom background display appears when operation is
normal (see page 6 for details)
Eight Point Zone/Relay Module:
 Each point is selectable as an IDC input or Relay output,
Class A IDCs require 2 points (one out and one return);
one module is standard, up to 3 additional modules can
be field installed for a total of 4 eight point zone/relay
modules per system
 Each point on the IDC/Relay Module can be configured
as a control relay rated 2 A @ 30 VDC (resistive) as
either normally open or normally closed
 Can be powered directly from the power supply or
through the optional 25 VDC Regulator Module
 IDC end-of-line resistor value can be selected from a
wide range of resistance values for retrofit convenience
Electrically isolated IDNet+ addressable initiating
device SLC:
 Provides built-in short circuit isolation for monitoring
and control of TrueAlarm analog sensors and IDNet
communications monitoring and control devices; for use
with either shielded or unshielded, twisted or untwisted
single pair wiring; outputs are Class A or Class B
 Standard panel SLC provides up to 100 addressable
points; optional additional loop expansion modules
provide an additional isolated loop with short circuit
isolation for the IDNet+ channel; each loop expansion
module also provides an additional 75 addressable points
Power Supply Features:
 Four Notification Appliance Circuits (NACs) selectable
as Class A or Class B with 6 A total available current
 NAC end-of-line resistor value can be selected from a
wide range of resistance values for retrofit convenience
 Additional notification power capacity is available using
the 4009 IDNet NAC Extender
 Battery backup charging of up to 33 Ah; up to 18 Ah for
cabinet mounted batteries and up to 33 Ah batteries for
mounting in close-nippled remote battery cabinet
General Mechanical:
 Red or platinum cabinet; rated NEMA 1 and IP30
4007ES Listings reference:
 UL 864 - Control Units, System (UOJZ); Control Unit
Accessories, System, Fire Alarm (UOXX); Control
Units, Releasing Device Service (SYZV)
 UL 2017 - Emergency Alarm System Control Units (CO
detection), (FSZI)
 ULC-S559 - Central Station Fire Alarm System Units
(DAYRC)
 ULC-S527 - Control Units, System, Fire Alarm
(UOJZC); Control Unit Accessories, System, Fire Alarm
(UOXXC); Control Units, Releasing Device Service
(SYZVC)
4007ES Fire Control Panels
4007ES Hybrid, Fire Detection and Control Panel with
Addressable and/or Conventional Initiation
4007ES Hybrid Panel Front View
Software Feature Summary:
 Current and previous panel configuration maintained in
on-board memory
 An internal Ethernet service port is available for service
computer connections to perform configuration updates,
downloads and uploads; report downloads, and system
software
 Internal USB interface allows a memory stick to store job
revisions, update revised jobs and panel software, and save
detailed system reports from the panel
Optional modules and connections include:
 Fire Alarm Network Interface for Peer-to-Peer fire alarm
network communications, supports either Class B or Class
X operation
 Point or Event DACT assembly for IP Communicators
 Up to two additional IDNet+ addressable device output loop
connections with short circuit fault protection and with 75
additional point capacity each
 Front mounted 48 LED annunciator with custom label
inserts; LEDs are programmable for up to 24 IDC zones of
alarm and trouble annunciation or other custom
annunciation requirements
 Remote LED annunciator support via RUI communications
port for use with UTP wiring
 Dual RS-232 ports (for printer, PC annunciator or third party
interface)
 TrueInsight Remote Gateway
 Alarm relays and auxiliary relays
 City connections, with or without disconnect switch
 4003EC Voice Control Panels
 4009 IDNet NAC Extenders to extend NAC capability for
power and distance
 Battery brackets for seismic area protection (see page 2)
* This product has been approved by the California State Fire Marshal (CSFM)
pursuant to Section 13144.1 of the California Health and Safety Code. See
CSFM Listing 7165-0026:0378 for allowable values and/or conditions
concerning material presented in this document. NYC Fire Dept COA #6191A.
Additional listings may be applicable; contact your
local Simplex product supplier for the latest status. Listings and approvals
under Simplex Time Recorder Co. are the property of Tyco Fire Protection
Products.
S4007-0001-10 1/2017