Ip File Transfer; File Transfer Connection To The Pc; Starting The Ip File Transfer Utility - Simplex 4007ES Programmer's Manual

IP File Transfer

IP File Transfer
IP file transfer operates over the Ethernet service port, with files directly copied to the file
system and activated. New Slave Exec data is then downloaded by the master once it is
running.
File Transfer The Ethernet service port is located on the CPU board behind the inner door assembly
Connection to the (see Figure 10-3) and connects to the Service PC using a standard straight (non-crossover)
PC Ethernet Patch Cable. Service Mode Jumper P7 must be connected for this operation which
causes a Service Trouble condition. After, move the jumper to only one pin to disconnect and
retain the jumper for future use.
Service Mode
Jumper P7
Starting the IP This feature enables a download of the Fire Alarm Control Panel (FACP) software features
(Panel Exec, Slave Exec, etc.). This provides a means for recovering previous configurations
File Transfer
(via the File Transfer "History/Undo" tab). This also makes it possible for the FACP to
Utility
continue operating during file download operation. FACP down-time is minimal.
The ES Panel IP File Transfer utility can be started from within the ES Panel Programmer or
from the Windows Start menu. To start the File Transfer:
When start-up procedure has been completed, the File Transfer Utility appears.
Figure 10-3. Front Panel Ethernet Service Port
• From within the Programmer. While the programmer is running, click on the
Transfer icon, located along the menu bar at the top of the programmer window. When
the options appear, click on Local Panel.
Figure 10-4. Transfer Icon
• From the Start Menu. Click the Start button. Move the pointer to the Programs
option. When the list of choices appears, move the pointer to the Simplex option and
click on the option containing the programmer. A list of options appears. Click on IP
File Transfer.
10-4
4007ES Panel Programmer Manual (579-1167)
Ethernet Service Port