Editing Properties - Simplex 4007ES Programmer's Manual

Specifying Hardware Components, Continued
Adding Hardware
To add a hardware component to the programmer using click + add:
1. Right click in the Hardware component window. An action list appears.
2. Select the type of hardware you want to add to the programmer from the action list:
To add multiple boxes or cards at one time, use the right-click method. Specify the number of
boxes/cards to add in the Quantity field.
Adding a City/ To add a City/Relay card:
Relay Card
1. In the Hardware Configuration window, double click on the IDNAC or the NAC power
supply component.
2. Click on the Data Entry tab.
3. Select the radio button that corresponds to the card you want to add (City connect or Relay).
Adding the To add additional loops in the IDNet expansion loop card:
Additional IDNet 1. In the Hardware Configuration window, double click on IDNAC power supply, then double
Loops click on IDNet+ Multiloop.
2. Click on the Loop Editing tab.
3. Select the first unused card 2: loop B isolator.
4. Change the device type to Isolator/Expanded point capacity.
5. Repeat steps 3 and 4 with the second unused card 2: loop C isolator.
Removing To remove hardware components from the programmer:
Hardware
1. Locate the hardware component in the Hardware Configuration window.
2. Right click on the hardware to open the action list.
3. Select Delete.
4. A warning message appears warning you that deleting a hardware component deletes all
references to that component. Click Yes if you wish to continue. If the component cannot be
deleted, a second warning appears with the specifics of why the component cannot be
deleted.
Note: Before deleting a hardware component, it is important to evaluate that component's role in the

Editing Properties

To access the Properties dialog, right
click on a Unit icon in the work area and
then click on Properties. For more
information on the cards and modules'
Properties window, refer to Chapter 6.
For the Box Properties window, refer to
Figure 5-1.
• Add Unit: The Unit Properties box automatically opens.
• Add Box: The Add Box window opens and displays the available boxes.
• Add Card: The Add Card window opens. Use the drop-down menus to select the card
you want to add. If the card cannot be added to the configuration, an error message
appears with the problem diagnosis.
programmer and make sure that all other elements attached to that component have been redirected.
• Description: Enter descriptive text
for the unit.
• AC Breaker Location: Enter the
location of the breaker to which the
power supplies within the unit's boxes
connect.
Chapter 5 Specifying Hardware Components
Figure 5-1. Box Properties Window
5-3