Tabs And Sub-Tabs; Status Bar - Simplex 4007ES Programmer's Manual

User Interface, Continued
Tabs and Sub-
Each tab represents a specific component or feature of the job that must be configured. The
Tabs tabs are placed in sequential order and should be completed in that order. Certain tabs are made
up of multiple sub-tabs that are found at the bottom of the page. All sub-tabs must be opened
and configured to complete the job.
Icon

Status bar

The Status bar is found at the bottom of the Programmer window and indicates the:
• Programmer status
• Time
Name Sub-Tabs
Panel • General Info
• System Options
• Access Levels
• Passcode
Assignments
• Features
Hardware • Tree View
• Grid View
Point -NA-
List • General list
• Latching Supervisory
Verification
• Alarm Verification
• WALKTEST
• Elevator Recall
Custom Control
• Custom Control
• Floor Above/Floor
Below Wizard
• Selective Signaling
Wizard
• Sounder/Relay Base
Operation Wizard
TrueAlert Zone -NA-
Port Vectoring
AMON Point Type -NA-
Zone Lists -NA-
Network
• Network Information
• Network Points
2-5
4007ES Panel Programmer Manual (579-1167)
Table 2-10. Tab list
Allows the user to:
Enter and view the general panel and branch
information.
Set the system options for the job.
View the default user levels for specific tasks. Right
click on the user level to view and edit its properties.
View and edit the passcode assigned to each user
level.
Enable or disable certain features with specific
dongles and codes.
Display the panel components in a branch structure.
Display the panel components in a grid structure.
Display the list of all the points in the FACP.
Double click on any of the points to view and edit
their properties.
View all the Panel lists.
View and edit the items on the Latching Supervisory
Verification list.
View and edit the items on Alarm Verification list.
View and edit the items on the WALKTEST list.
View and edit the items on the Elevator Recall list.
Create custom control equations which allow
operations to be customized per job.
Control the areas in which the NACs are activated.
Control the NACs that are activated.
Customize the default operation of select smoke
detectors
View the points in each TrueAlert zone.
-NA Assign certain cards to specific groups of events.
View the analog monitor (AMON) points.
View the lists sorted by zone.
Add and edit the lists of public and external points.