Simplex 4007ES Programmer's Manual page 62

Point Editing for TrueAlert Device, Continued
TrueAlert ES
Use this device type to edit TrueAlert ES Visual Only LED Strobe High Candela (VO-LH)
appliances. The following editing options are available for this appliance:
VO-LH
Appliances Point
Editing
Custom Label
Alternate Label
Style
Operation
Mounting
Candela
Note: The "Copy/Paste/ Special Paste" feature can be used to configure multiple devices identically.
Table 7-5. TrueAlert ES VO-LH Point Editing Options
Option
This field is used to describe the appliance's function, location, or other descriptive
information.
This field is used to enter an alternative description of the appliance.
Select the Style that corresponds to the appliance or device you are programming.
• Indoor.
• Weatherproof UL/
ULC.
Available candela
options:
Select the type of operation the appliance will signal.
General Evac.
Other
Only a wall-mounted appliance is allowed.
Select the candela output of the appliance. The selection varies according to the
appliance style.
4007ES Panel Programmer Manual (579-1167)
Description
System Default. Selecting this option sets the candela value to
the one selected in the System Option tab.
110 candela
135 candela
175 candela
Hardware. Selecting this option sets the appliance to the setting
indicated on the appliance's configuration switch or jumper.
The strobe is automatically associated with the "ALL VISUAL"
VNAC by default. The "alarm/alert" switch on the device must
be set to "Alarm".
When this mode is selected the user is confirming that the
strobe does not have a default assignation to a particular VNAC
and that the VNAC must be specified by the user.
7-6