Simplex 4007ES Programmer's Manual page 14

User Interface
Menus
Menu Item
Cut
Copy
Paste
Preferences
Menu Item
Revision History
*Tab List*
Checklist
Toolbar
Status Bar
Menu Item
Notes
Menu Item
Build Job
View Build Log
Table 2-2. Edit Menu
Description
Copies and deletes the selected content.
Copies the selected content.
Inserts the previously cut or copied material into the selected area.
Allows the user to configure certain aspects of the programmer.
Table 2-3. View Menu
Description
Allows the user to enter notes about the changes made for each revision.
Click on the option to open the corresponding tab. The choices are:
• Panel: Allows the user to access the following sub-tabs: General Info, System
Options, Access Levels, Passcode Assignments, and Feature.
• Hardware: Allows the user to add and remove components and configure their
properties.
• Point: Allows the user to edit TrueAlert devices.
• List: Allows the user to access the following sub-tabs: General List, Latching Supv
Verification, Alarm Verification, WalkTest, and Elevator Recall.
• Custom Control: Allows the components of the ES Panel FACP to be controlled
with user-definable custom control equations.
• TrueAlert Zone: Allows the user to view the points in each TrueAlert zone.
• Port Vectoring: Allows the user to program cards to output only specific groups of
events.
• AMON Pt Type: Allows the user to create custom point types.
• Zone Lists: Allows the user to view the lists sorted by zone.
Displays a mandatory and an optional checklist that lets the user know which steps
have been completed in the programming process.
Click in the checkbox to make the tool bar icons visible.
Click in the checkbox to make the status bar visible.
Table 2-4. Tools Menu
Description
Click to open a note pad where the user can type in notes about the job.
Table 2-5. Build Menu
Allows the user to:
Build the job.
Click to view the log of previous builds for this job.
2-2
4007ES Panel Programmer Manual (579-1167)
Continued on next page