Simplex 4007ES Programmer's Manual page 138

AMON Point Type, Continued
Editing a Point
To edit an existing point:
1. Right click on the point you want to modify.
2. Click on Properties.
3. Modify the AMON Properties as required.
4. Click Apply > OK.
Deleting a Point To delete an existing point:
1. Right click on the point you want to delete.
2. Click on Delete.
3. Click on Yes to confirm.
4007ES Panel Programmer Manual (579-1167)
Figure 12-5. Editing an AMON Point Type
12-4