Glossary; User Interface - Simplex 4007ES User & Installation Manual

Overview, Continued

Glossary

Aux
EOL
FACP
Hybrid
IDC
IDNet
IDNet+
IDNAC
NAC
Regulated 24 DC
RUI
Simple NAC
SLC
SmartSync

User Interface

The user interface is a 4.3" (109mm) diagonal color LCD with a built-in resistive touch panel
and 12 indicating LEDs. The color LCD provides system status and access to perform system
functions and to change the system configuration.
Figure 1-1 shows an inside view of the 4007ES panel with the optional LED module
(4007-9805) installed.
Term
Abbreviation for Auxiliary; typically used to describe Auxiliary Power.
End-of-Line (typically in reference to and end-of-line resistor or EOL
resistor).
Fire Alarm Control Panel.
In this document, "Hybrid" the 4007ES Hybrid models that provide both
addressable and conventional initiation with conventional non
addressable Notification Appliance Circuits.
Initiating Device Circuit.
Addressable SLC for up to 250 addressable devices.
IDNet which is electrically isolated from internal panel electronics.
Individual Device Notification Appliance Circuit (Addressable).
Notification Appliance Circuit (formerly called signal circuit).
Notification appliance operation that meets the minimum listing
requirements; inrush currents typically require power supply and NAC
rating.
Remote Unit Interface; SLC for communications with remote
annunciators.
A Reverse Polarity Supervised Notification Appliance Circuit that is
capable of on steady or coded operation. Sync or SmartSync operation
is not supported.
Signaling Line Circuit
A reverse polarity monitored NAC capable of synchronizing and
controlling both horns and strobes on the same circuit via a proprietary
signaling protocol. Used as the protocol for TrueAlert Non-Addressable
Devices.
Figure 1-1. 4007ES Panel Inside View
1-2
Chapter 1 Overview
Definition