Light Guide/Handpiece; Battery Charging - 3M Elipar DeepCure-L Manual

Led curing light
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SEITE 5 - 148 x 210 mm - 44000118149/02 - SCHWARZ - 20-113 (kn)
Charger Model CPS008050100
Plug adapter
Charger Model GTM96060-0606-1.0
E
Remove the plug adapter by pushing the slider
switch in the direction of the arrow.
Light Guide / Handpiece
E
Place the glare shield on the front of the device.
E
Autoclave the light guide prior to first use.
E
Then attach the light guide to the handpiece until it
Charger
noticeably locks into place (see Section "Removing
and Inserting the Light Guide from/into the Hand-
piece").
E
If the device malfunctions, insert the charger plug
into the charging socket of the handpiece. The
device will reset itself and can then be used again.

Battery Charging

E
The device contains a powerful lithium-ion recharge -
able battery. This type of battery does not have any
memory effect and can therefore be recharged at
any time by inserting the charger plug into the
charging socket of the handpiece (see the section
"Battery Power Level Display on Handpiece").
E
Before using the handpiece for the first time,
connect it to the charger for a period of about
2 hours so that the new battery is completely
charged for the first time. Make sure the colors line
up correctly.
5

Advertisement

Table of Contents
loading

Table of Contents