Starting Cryogenic Operation; Start The Cryogenic Process As Follows - Agilent Technologies Cryogenic User Manual

2
Cryogenic Operation

Starting Cryogenic Operation

Start the cryogenic process as follows:

28
The CryoBay Monitor program controls the following
start- up and cryogenic operations processes:
• Vacuum pumping the CryoBay vacuum system and probe
• Helium purging and repressurizing of the system
• Starting the CCC (He Refrigerator)
• Cooling down the probe
• Regulating the probe internal temperature at the set
point.
• Monitor and control all cryogenic functions and systems.
See "Operation Cycle, Status Messages, and States"
page 57. Click the Start button for information on the
operation cycle.
"CryoBay Monitor"
screens utilized during CryoBay operation.
Open the CryoBay Controls popup window.
1
Click the Start button, as seen in
2
cryogenic operation.
Figure 11 CryoBay controls popup window
on page 65, describes the various
Figure
Start
Cryogenic Systems Operation
on
11, to start