Startup And Operation Of The Tps-Mobile - Agilent Technologies TPS-mobile User Manual

Instructions for Use

Startup and Operation of the TPS-mobile

After TPS-mobile unpacking, perform a brief visual analysis of the system to be

sure that no sign of damages due to transportation is present (critical parts are:
TMP flange, Forepump fastening brackets, system front panel and the system
wheels).
Check the system voltage on the Agilent label stuck on the system electronic

units case.
The initial startup of the pump TwisTorr 305 FS and TwisTorr 305 FSQ will
WARNING
be in "SOFT START" mode; for detailed information on this mode refer to
the dedicated section.
Figure 79
If the voltage provided by your electrical supplier is compatible with the system

voltage, you can connect the provided power cord to the IEC320 electrical
socket on the rear side of the system (see figure above).
The socket is provided with a retention spring to avoid accidental disconnection
of power cord plug – use the spring to fasten the power cord plug.
220
Part Number (PN)
Serial Number (SN)
Electrical Data
Agilent TPS-mobile User Manual