Table of Contents
Advertisement
2
Cryogenic Operation
Configuring VnmrJ for Cryogenic Operation
26
1
Open the VnmrJ window. The CryoBay page is hidden.
2
In the menu, click edit and then System Settings. You
must be the system administrator, typically Vnmr1.
The system settings window opens, as seen in
3
Click on the System tab.
Figure 8
System settings window
Click on the System config button.
4
5
The System Settings window closes and the configuration
window opens, as seen in
For CryoBay, select present.
6
Click OK.
7
The Cryo tab will appear in the vertical panel, as seen in
8
Figure
9.
Figure 9
Cryo tab
Varies
depending
on set up
Figure
10.
Cryogenic Systems Operation
Figure
8.
Advertisement
Table of Contents
