Agilent Technologies Cryogenic User Manual page 34

2
Cryogenic Operation
34
Verify that the plastic bushing and rippled plastic sleeve
7
are on the stinger. Look inside the arm of the Agilent
Cold Probe if the bushing is missing from the stinger and
place the bushing back on the stinger. If the plastic
sleeve has been left behind, it is acceptable to leave it in
the probe. Do not attempt to extract the plastic sleeve as
it is easy to damage it.
8 Immediately cap off the cryogenic couplers, both on the
CryoBay cryogenic transfer arm and the Agilent Cold
Probe.
Cryogenic Systems Operation