Cryobay Controls - Advanced - Agilent Technologies Cryogenic User Manual

5
CryoBay Monitor
CryoBay Controls – Advanced
C A U T I O N
76
The Advanced panel is available to certain users, based on
their VnmrJ access level. View the Advanced panel, as seen
in Figure 33, by selecting it from the Options menu on the
CryoBay Controls Window.
Send CryoBay
Commands Directly
to the CryoBay
Internal Computer
Board
Enter Commands
in Command Line
Send Commands
Directly to the
Temperature
Controller
Figure 33 CryoBay controls - advanced
The Text Display shows:
• Messages sent to the CryoBay or temperature controller
• Messages sent from the CryoBay or temperature controller
• Fault messages
• Data line sensor and valve status information, see
"CryoBay Data Log"
Improperly entering commands into the command lines can
over-ride an existing operation, potentially causing damage to
equipment. If in doubt, check with Agilent Customer Service.
on page 79.
Cryogenic Systems Operation
Vacuum Purge of
System when idle
Pump Probe
when idle
Text Display