4. Operation
4.1
Audible single pulse indication and finder mode
4.1.1
Single pulse indication
With the single pulse indication being selected, each pulse of
the detector generates a short audible signal emitted by the
beeper.
An audible alarm signal caused by exceeding the alarm thresh-
old is not given while single pulse indication is active.
The single pulse indication must be enabled in the menu.
It is activated and deactivated by two times pressing the right or
top button:
With the help of radeye.exe the user may activate a "single
pulse click divider". In this mode every 20 pulses one audible
output is made.
RadEye PRD-ER
Iw/Tr/Ff 06.07.2015
Indication of active sin-
gle pulse indication.
DB-066 E
4-1